Aluminum Composite Material

Aluminum composite material (ACM) is a three-ply composite sheet compose of plastic in the middle and aluminum on both sides, with a protective and decorative coating on the ornamental surface. The use of ACMs in construction has increase in recent years.

The use of ACMs in buildings has skyrocketed during the past few decades. They are highly sought after by fashion designers for their versatility and contemporary, sleek appearance. Customers will have two options for the core material of their ACM, both of which use thin sheets of aluminum.

The first readily available material for use in acm metal panel is polyethylene, or PE cores. Affordable and lightweight, ACM panels with PE cores are a popular alternative for structures up to two stories in height. Modern, customized fire-retardant cores are a popular choice among builders for major construction projects. Multi-story buildings may soon be require to use these panels due to new fire safety regulations, despite the higher cost associate with their fire-resistant cores.

Aluminum Composite Material

Commonly abbreviate as “ACM,” aluminum composite material consists of two layers of aluminum that have been pre-finish and are bond together around a polyethylene core to form a rigid sheet. Signage and channel letter backings, wall liners and insulation are just some of the many uses for ACM sheets due to their lightweight durability.

Aluminum Composite Acm can be easily route, cut, or roll-formed, aluminum composite material is often use in place of steel in building cladding and fa├žades. More cost effective than aluminum sheet of the same gauge, ACM lays flatter than typical aluminum sheet, minimizing oil canning and rippling effects.

Explaining the Success OF ACM

Rigidity – The aluminum-plastic composite panel is more resistant to deformation than a single-layer aluminum plate and can keep its flatness for a long time without additional external force.

ACM’s lightweight construction results from its use of aluminum with a low-density plastic core. Because of this, ACM is just as robust and thick. As aluminum panels or other metals, yet it is much lighter and more compact.

Full of Vivid Color and Suitable for Adornment The aluminum-plastic panel’s design and color options make it versatile and useful in a wide range of contexts. Granite, wood grain, and metal patterns are also replicate using photocopying technology, creating a unique texture and a high-quality pattern design.

So, aluminum-plastic composite board is built to last. Also, thanks to the application of thermal composite technique for connecting the metal and core material. Different types of coatings are use for different purposes, with fluorocarbon coatings offering the best weather protection.

The fundamental pieces of the Aluminum Composite Acm are made from recycled aluminum and plastic. so they don’t do much damage to the environment when they’re thrown away. Moreover, fluorocarbon coatings are employed on wood-aluminum composite panels and outdoor ornamental aluminum-plastic panels due to their remarkable longevity and minimal daily maintenance requirements, hence reducing the total life cycle cost.

ACM is widely use for curtain walls, outside wall decoration and advertising, and interior wall decoration. Keep in mind that acm extrusions building material specifications change depending on application.

Constructional Curtain Wall ACM

The upper and lower aluminum panels must be at least 0.50mm thick, for a total of at least 4mm. The aluminum used must be in accordance with the standards laid out in GB/T3880. In most circumstances, 3000 or 5000 series aluminum alloy sheets are the best option. The coatings should be made of fluorocarbon.

Indoor Aluminum Composite Material

The standard thickness for the upper and lower aluminum panels is 0.20 mm. With a minimum thickness of 0.10 mm and a maximum thickness of 3 mm. A polyester or acrylic finish is used. ACM materials have several uses and can be use in many places, including airplanes, cabinets, and cars.


ACM materials can be utilized indoors or out for tasks that need durability, lightweight construction, and a contemporary aesthetic. The panels are available in an almost infinite range of colors and finishes, and may be cut, routed, and roll-formed. To allow architects and designers to construct stunning one-of-a-kind structures. ACM’s ease of fabrication in comparison to bare sheet metal is highly value by many of its end customers.

So, in addition, ACM can retain its original form and visual appeal for a very long time. The aluminum skins of the panels are long-lasting and strong and stiff in any temperature. Also, while the plastic core eliminates warping and deformation that would be induce by heavier sheet metal. Find Companion Items Here

Leave a Reply

Your email address will not be published. Required fields are marked *