Has your dream of owning a 150cc Dirt Bike or a 125cc dirt bike finally come true? How was your first ride experience? What should you do to make sure that you enjoy many more rides for a very long time?
Just like a car, a dirt bike requires routine checks and maintenance for it to perform well consistently. Whether it is a 150cc dirt bike or a 125cc Dirt Bike, it must be taken good care of to minimize repair costs and ensure your safety and the safety of others. Below are some key things that you need to do:
- Wash it after every ride.
Even if you are tired after a long ride, you should not put off washing your dirt bike. Dirt, mud, and other debris can get into your bike’s engine and other electrical components and cause damage. Before all the mud dries and hardens, give your bike a thorough wash. With a bucket of water and a brush, you can remove debris from the body, tires, and other parts. You can also use a water hose to wash everything down.
- Dry it thoroughly.
After washing your bike, you should dry it by wiping it down with a clean, dry cloth. Doing so allows you to carry out the next step more easily.
- Inspect it for damage.
Now that your bike is completely clean and dry, you should take a close look at it to spot any damage. Check for leaks by examining if there is oil dripping on the ground. Check that your bike’s chain tension is right by removing it from the rear sprocket. If you are able to get it out, this means that it has become loose and requires replacement. You should also check the bolts, controls, control cables, bearings, exhaust pipes, and valves to ensure that they are not worn out or broken.
- Remember to change the oil.
Oil is crucial in keeping the internal components of your dirt bike in tip-top shape. It keeps them cool and reduces friction. If it is not changed regularly, it gets old and can cause your bike to seize. In a 2-stroke bike, an oil change has to be done every 6 hours, while in a 4-stroke bike, it is necessary every 5 hours.
- Check the coolant, brake, and clutch fluid levels.
The different fluids used in your bike play important roles in keeping it running. Coolant protects the engine of your bike against overheating. Brake fluid and clutch fluid are key to ensuring that your bike responds to your controls properly.
Many parts of your bike need to be lubed up to prolong their lives. The brake and throttle cables, for example, have to be lubricated so that they do not rust. The steering head and wheel bearing, and the shock and wheel seals also need grease to function correctly. Other components, such as the swing arm, hardware, and the sealing area of the air filter, are kept dry and clean with a good amount of lubricant.